559969-RTRAF_1 copy

Modern-day woodwork is impossible to perform without a router table. To perform elaborate woodwork or to make intricate designs, a router table is a must. It provides accuracy, consistency, and precision of work. While there are numerous choices available in the market, you can See Details Review of various models on various online discussion forums. Apart from the equipment, the choice of wood and other features is an equal contributor to the overall feel. If you are a beginner, you can visit www.foe.co.uk/page/different-types-wood-timber to make the right choice. There are certain technicalities which should be closely reviewed before making the decision to buy a router table.

The smoothness and rigidity of the table top are essential to achieving the desired precision. Rigidity is vital because, when excessive downward pressure is put onto the table, if the table is fragile it will buckle or wobble and this may affect the equipment’s ability to properly cut the work piece to the correct depth and shape. One of the most reasonably priced commercial router table top materials is MDF. These tops are usually 1 inch thick and have a melamine coating to provide protection and smoothness. A higher quality router table top is made from phenolic resin. This material has high impact resistance and is rigid, durable and light. Certain router tables also come with cast iron table tops.

The router is attached to a base plate which fits into the opening of the tabletop. Since these plates support the weight of the router, they should be robust, durable and should perfectly fit into the surface of the table. A good flat base plate system would have multiple points of contact between the table and plate with numerous locking options.

One of the most critical components of the router table is the fence which controls the cutting process by keeping the stock placed in the correct position. These fences come in two variations. The split fence has two independent adjustable parts; this way, the fence can be positioned closer to the bit to give a better result. If both the parts need to be aligned in parallel, using this fence can be challenging. The one-piece fence is less complicated than the split fence, as there is the only single piece that covers both infeed and outfeed side.

The main functionality of the router table is to cut the stock wood whilst keeping it pressed against the table’s fence. Miter gauges simplify this process. These miter slots also help in safeguarding feather boards and other router table parts. T-slots are positioned on the front surface of the fence to allow attaching of any couplings or flip stops if required.

It all breaks down to the table base being sturdy. To get sharp cuts, it is important that the stock stays in constant contact with the cutter and the speed should be consistent. A shifting or wobbling table may not perform well and can prove hazardous in some situations. One should evaluate all the technicalities mentioned above before buying any router table.